Monarch-instrument ROLS24-W Bedienungsanleitung PDF herunterladen

ROLS24-W

Remote Optical Laser Sensor

SAFEGUARDS AND PRECAUTIONS:

WARNING – Class 2 laser product – This product emits a visible beam of

laser light. Avoid exposure to the laser radiation. The use of optical viewing

aids (binoculars, for example) may increase the ocular hazard.

CAUTION – The laser beam should not be intentionally aimed at people or

animals.

CAUTION – Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous radiation exposure.

Read and follow all instructions in this instruction sheet carefully, and retain this sheet for future reference.

Do not use this instrument in any manner inconsistent with these operating instructions or under any

conditions that exceed the environmental specifications stated.

This instrument is not user serviceable. For technical assistance, contact the sales organization from which you

purchased the product.

DESCRIPTION:

The Remote Optical Laser Sensor has a visible red laser light source and green

LED on-target indicator. The class 2 laser source acts as the aiming device during

setup and can accurately measure speeds from 1-250,000 RPM from a distance of

up to 25 feet with a maximum offset angle of 60 degrees from the rotating object.

The sensor is housed in a threaded 303 stainless steel tube and supplied with a 90

degree mounting bracket, jam nuts and an eight foot shielded cable. ROLS24-W

comes with 4 tinned wires.

SPECIFICATIONS:

Speed Range: 1-250,000 RPM

Illumination: Visible Red Laser, Class 2

Laser Specifications: Classification: Class 2 (per IEC 60825-1 Ed 1.2 2001-8)

Complies with FDA performance standards for laser products except for deviations pursuant to Laser

Notice No. 50, dated July 26, 2001.

Maximum Laser Output: 1mW

Pulse Duration: Continuous

Laser Wavelength: 650 nm

Beam Divergence: <1.5 mrad

Beam Diameter: 4 x 7 mm typical at 2 meters

Laser Diode Life: 8,000 operating hours MTBF (1 year warranty)

On-Target Indicator: Green LED on wire end cap

Operating Range: up to 25 feet [7.6 m] and 60 degrees offset from target

Power Requirement:

9 - 24 Vdc, 0.13W

Output: Positive pulse when target present – Output Voltage=Supply Voltage

Optional – Open Collector or TTL pulse, Negative pulse (Contact factory)

Operating Temp.: 14 °F to 158° F [-10 °C to 70° C]

Humidity: Maximum relative humidity 80% for temperature up to 88 °F [31 °C] decreasing linearly to 50%

relative humidity at 104 °F [40 °C]

Connection: Tinned wires

Cable Length: 8 feet [2.4 m]

Material: 303 Stainless Steel supplied with two M18 Jam Nuts and Mounting Bracket

Lens: Acrylic Plastic

Dimensions: Threaded Tube 3.12 in x 0.71 in diameter [M18 x 1.5 x 79.4 mm] long

LASER RADIATION

AVOID DIRECT EYE EXPOSURE

CLASS 2 LASER PRODUCT

MAX OUTPUT POWER: 1mW

EMITTED WAVELENGTH: 650nm

CLASSIFIED TO IEC 60825-1:2001

WARNING:

Laser light

emitted from

this aperture

1 2

Inhaltsverzeichnis

Seite 1 - Remote Optical Laser Sensor

ROLS24-WRemote Optical Laser SensorSAFEGUARDS AND PRECAUTIONS:WARNING – Class 2 laser product – This product emits a visible beam oflaser light. Avo

Seite 2 - 1071-4849-110R

OPERATING INSTRUCTIONS:The ROLS24-W Remote Optical Laser Sensor is capable of detecting a reflected pulse from a target consisting of T-5 Reflective T

Kommentare zu diesen Handbüchern

Keine Kommentare

Monarch-instrument ROLS24-W Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sensoren Monarch-instrument ROLS24-W herunter. Monarch Instrument ROLS24-W User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Monarch-instrument ROLS24-W