Monarch-instrument 9493 Bedienungsanleitung PDF herunterladen

MONARCH



9493™

VEHICLE MOUNT INSTRUCTIONS

Using the vehicle mount, you can attach your Monarch Sierra Sport4™

9493 printer to a forklift or other vehicle.

This document describes how to install and use the vehicle mount with the

printer.

Installing the Battery

The printer has a battery for power; however, it uses the vehicle’s battery to

keep the printer’s battery charged. The input voltage range is 12-72V.

Refer to the printer’s Operator’s Handbook available on our Web site

(www.monarch.com) for important battery information.

1. Turn off the printer when you change batteries.

2. Lay the printer down so the back of the printer faces up.

3. Remove the plastic from a new battery.

4. Slide the battery into the battery well in the bottom of the printer until it

latches into place.

Latch

1 2 3 4 5 6 7 8

2 USB cable Connecting the Communications Cables The printer uses either 9-pin serial communications or USB communications. For best result

Seite 3

3 Installing Overhead (Recommended) 1. Select a suitable location for the mount on your vehicle. 2. If using the mounting plate, center the mountin

Seite 4

4 Installing Vertically or on a Tabletop 1. Select a suitable location for the mount on your vehicle. 2. If using the mounting plate, align th

5 Attaching the Printer To attach the printer on the vehicle mount: 1. Use the M3 allen wrench to remove the plastic strap buttons on each side of t

6 5. Plug the battery charging cable into the battery socket on the back of the printer. Reading the LEDs Three LEDs on the vehicle mount indica

7 Printing Refer to the printer’s documentation for information on loading supplies and printing. Replacing the Fuse The vehicle mount uses a 10-amp,

8 Electrical Specifications Output is electrically isolated from the input. Output common is not connected to the forklift module chassis. It can

Keine Kommentare

Monarch-instrument 9493 Bedienungsanleitung