Monarch-instrument PLT200 Bedienungsanleitung PDF herunterladen (Seite 6)

4.0PLT200 SPECIFICATIONS

Laser Specifications:

Classification: Class 3R (per IEC 60825-1 Ed 1.2 2001-8)

Complies with FDA performance standards for laser products except

for deviations pursuant to Laser Notice No. 50, dated July 26, 2001.

Maximum Laser Output: 3mW

Pulse Duration: Continuous

Laser Wavelength: 650 nm

Beam Divergence: < 1.5 mrad

Beam Diameter: 4 x 7 mm typical at 2 meters

Laser Diode Life: 8,000 operating hours MTBF (1 year

warranty)

Non-Contact Specifications:

Ranges: RPM 5 – 200,000

RPS 0.084 – 3,333.3

RPH 300-999,990

Resolution: Fixed: 1 (10 above 99,999)

Auto-ranging: 0.001 to 1.0 (10 above 99,999)

Accuracy: ±0.01% of reading or resolution limit

Operating Range: up to 25 feet (7.62 m) or up to 70 degrees off

perpendicular to T-5 tape target

Contact Specifications using optional Remote Contact Assembly:

Range: Contact Tips: 0.5 to 20,000 RPM

10 cm / 12-inch Wheel: 0.5 to 12,000 RPM

Resolution: Fixed: 1 (10 above 99,999)

Auto-ranging: 0.001 to 1.0 (10 above 99,999)

8. Save and

advance

9. Exit Setup –

Ready to

measure

Measure:

Reset

Lap

Power Off

Unit will remember these settings (including lock on/off) even if turned off

and back on.

DONE, then Units

selected

Manual

Auto

Each press toggles Start and Stop

Start and Stop triggered by

Remote Optical Sensor (ROS)

With Timer stopped -

Resets time to 00:00.0

With Timer running -

Stops at elapsed time to date.

To continue, press again.

9.2 TIMER Operation

Automatic after 90 seconds

if unit not Locked on

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Monarch-instrument PLT200 Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Monarch-instrument PLT200